Rotoclear · CNC machine camera

CNC machine camera: a live view of the cut, from inside the machine

A CNC machine camera mounts inside the enclosure and shows the cut while the coolant runs, so nobody has to stop the cycle or open the door to look. Rotoclear camera heads sit behind their own spinning window, which throws coolant and chips off the lens. The live image goes to a display, or with the C2 and C Pro to any screen on your network.

Configure & get a quote Check your machine fit

Rotoclear C2 control unit with two camera heads

What a camera inside the machine does

See the cut without stopping

Watch the tool and the workpiece while the machine runs, guard closed, instead of stopping the cycle or opening the door.

Views a window can’t give

Mount the head at the top, at the side or right at the tool: the rear of the spindle, the tool changer, or a horizontal or pallet machine with no line of sight from the door.

Watch from anywhere

With the C2 and C Pro, the live view streams to any screen on your network, from the next bench to a central monitoring station.

Record the job

The C2 records specific process steps to external storage. The C Pro records every job in the background, with a searchable timeline, and with ChipDetect AI warns when chips start to tangle into a nest.

Camera or spinning window?

A spinning window in the door is enough when someone stands at the machine and can see the cut through the glass. A camera inside the machine is better when there is no line of sight, nobody at the door, or you want to record the job. You can also use both: the S3 is the window you look through, and the camera has its own spinning window. We sell and install both, so we recommend what fits your machine.

Spinning window, air blast, wiper or film: how they compare →

Which Rotoclear for which use

A live view at one machine

Rotoclear C Basic

One 4K camera head and an HDMI feed straight to a shop-floor monitor, with no network setup. Upgradeable to the C2 later.

Explore Rotoclear C Basic →

Two views at once, on any screen

Rotoclear C2

Up to two camera heads, network streaming to any screen, and recording of specific process steps to external storage. The C-Extender takes cable runs to 40 m, or 60 m with two, for large machines.

Explore Rotoclear C2 →

Every job on record

Rotoclear C Pro

Records every job in up to 4K at 60 fps with Visual Backup and a timeline, on up to 4 TB of onboard storage. Optional ChipDetect AI watches the chips.

Explore Rotoclear C Pro →

A clear view through the door

Rotoclear S3

Not a camera: the self-cleaning spinning window for the machine door, for operators who watch the cut through the glass.

Explore Rotoclear S3 →

Next steps

We sell Rotoclear in the US and Canada as the exclusive distributor, and install it on site across the USA, on any make of metal-cutting CNC machine. No prices online: every system is quoted on request.

Configure & get a quote