Consumables — European-built DMG MORI machines only
Oils, greases, antifreeze & filters for DMG MORI machines
All CNC Service & Sales supplies consumables for European-built DMG MORI, DECKEL MAHO and Gildemeister machines: Fuchs spindle-chiller coolant, grease and hydraulic oil, Lithogrease 000, filter mats for spindle chillers and electrical-cabinet cooling units, and complete AFS mist-extractor filter sets.
Consumables are standalone parts orders — no PM visit or service job needed. Tell us the machine model and what you need, and we'll quote it. No prices online.
Spindle-chiller coolant and antifreeze
Fuchs Renolin MPG 5 MIX 30 IDM
Pre-mixed water-glycol coolant: mono-propylene glycol, 30% with 70% deionized water. Blue fluorescent, with corrosion protection. For spindle chillers. 20 L.
Fuchs Renolin MPG 5 CONC IDM
The same coolant as a concentrate, for mixing on site. 20 L.
Clear antifreeze for Gildemeister
The clear antifreeze for Gildemeister GMX, Gamma, Beta and CLX machines.
Greases for central lubrication
Fuchs Renolit LI IDM 000
Semi-fluid grease for machine-tool central lubrication.
Lithogrease 000
Semi-fluid grease for central lubrication. 1 L tube.
Hydraulic and spindle oil
Fuchs Renolin ZAF D 46 HT
Zinc- and ash-free hydraulic oil with detergent properties, usable as hydraulic or gear oil. Meets DIN 51524-2 HLPD and ISO 6743-4 HM. 20 L.
Fuchs Renolin FF 68 IDM
Super-clean spindle oil, ISO VG 68.
Filter mats for spindle chillers and cabinet cooling units
Filter mats for the ritter+bader spindle chillers on DMG MORI machines and for the Rittal cooling units on electrical cabinets. Two mats are listed below by DMG MORI number; for any other mat, send us the machine model and we'll match it.
Filter mats by DMG MORI number
- Spindle-chiller filter mat: DMG MORI no. 2488610, 460 × 390 mm
- Electrical-cabinet cooling-unit filter mat: DMG MORI no. 2425973, 405 × 340 × 15 mm (16" × 13")
Why they matter
A clogged mat starves the cooling unit of air. The electrical cabinet and the spindle chiller run hot, and that means alarms, thermal drift and downtime.
Part of every PM visit
We check the mats at every preventive-maintenance visit, change them when needed, and include them in our maintenance kits.
Preventive maintenance & kits →
AFS mist-extractor filter sets
Complete filter sets for AFS mist extractors on European-built DMG MORI machines, per unit type: AFS 600, 1100, 1600 and 3000/4000. Pick your unit type below for the complete set with DMG MORI numbers, then request it through the quote form.
The four filter stages in a set
- Knitted metal-mesh pre-separator
- EU5 pre-filter fleece, with or without exchange frame (AFS 3000/4000: S-fleece set, no exchange frame)
- Longlife separator (AFS 3000/4000: main separator)
- HEPA H13 after-filter
Metal-mesh pre-separator
Washable. Clean it at least every four weeks.
EU5 pre-filter fleece
Replace it when it is dirty, and at least every four weeks.
Longlife separator
Clean it only when it is heavily soiled, at no more than 60 °C.
HEPA H13 after-filter
Cannot be cleaned. Replace it when the suction drops.
Look the unit over once a week, and keep one spare set on the shelf for each AFS unit type you run.
Find the complete set for your AFS unit
| Filter stage | Qty | DMG MORI no. | Size |
|---|---|---|---|
| Knitted metal-mesh pre-separator | 2 | 6013313 | on request |
| EU5 pre-filter fleece | 2 | 6013158 | 390 × 360 × 20 mm |
| Exchange frame for the pre-filter fleece (option) | on request | 59400044 | on request |
| Longlife separator | 1 | 6013328 | 353 × 387 × 30 mm |
| HEPA H13 after-filter | 1 | 6013330 | 305 × 305 × 215 × 20 mm |
Want the fleece with an exchange frame? Say so in your message.
| Filter stage | Qty | DMG MORI no. | Size |
|---|---|---|---|
| Complete set without exchange frame, one order number (or order the parts below) | 1 | 25504991 | on request |
| Exchange frame for the pre-filter fleece (option) | on request | 59400075 | on request |
| Knitted metal-mesh pre-separator | 2 | 6010083 | on request |
| EU5 pre-filter fleece | 2 | 6010082 | 460 × 365 mm |
| Longlife separator | 1 | 6010408 | on request |
| HEPA H13 after-filter | 1 | 6010409 | 455 × 455 × 320 × 28 mm |
Want the fleece with an exchange frame? Say so in your message.
| Filter stage | Qty | DMG MORI no. | Size |
|---|---|---|---|
| Knitted metal-mesh pre-separator | 2 | 6010083 | on request |
| EU5 pre-filter fleece | 2 | 6010082 | 460 × 365 mm |
| Exchange frame for the pre-filter fleece (option) | on request | 59400075 | on request |
| Longlife separator | 1 | 55280002 | on request |
| HEPA H13 after-filter | 1 | 6010409 | 455 × 455 × 320 × 28 mm |
Want the fleece with an exchange frame? Say so in your message.
| Filter stage | Qty | DMG MORI no. | Size |
|---|---|---|---|
| Knitted metal-mesh pre-separator | on request | 59400050 | on request |
| Pre-filter fleece set (S-fleece) | on request | 59400051 | 2 pieces, each 452 × 355 × 5 mm |
| Main separator | on request | 59400052 | on request |
| HEPA H13 after-filter | on request | 59400053 | on request |
Coolant filter paper
Coolant filter paper
Coolant filter paper — tell us the machine model and what you need. Sizes and machine fit on request.
Consumables FAQ
Where can I buy AFS mist extractor filters for DMG MORI machines?
From All CNC Service & Sales LLC in Montgomery, Texas, in the Houston metro. We supply complete AFS filter sets — a metal-mesh pre-separator, pre-filter fleece (EU5 on the AFS 600, 1100 and 1600), a Longlife or main separator and a HEPA H13 after-filter — for AFS 600, 1100, 1600 and 3000/4000 units on European-built DMG MORI machines. Send us the AFS unit type and the machine model for a quote, or call (832) 755-9156.
Which oil, grease and antifreeze do DMG MORI machines use?
It depends on the machine. We supply Fuchs Renolin MPG 5 water-glycol coolant for spindle chillers (pre-mixed or as a concentrate), Fuchs Renolit LI IDM 000 and Lithogrease 000 semi-fluid greases for central lubrication, Fuchs Renolin ZAF D 46 HT hydraulic oil, Fuchs Renolin FF 68 IDM spindle oil, and the clear antifreeze for Gildemeister GMX, Gamma, Beta and CLX. Send us the machine model and we'll quote what it needs.
How often should the filter mats on a DMG MORI chiller and electrical cabinet be changed?
Check them at every preventive-maintenance visit and change them when they are visibly clogged; in dusty shops, check and change them more often. A clogged mat makes the electrical cabinet and the spindle chiller run hot, which leads to alarms, thermal drift and downtime.
Can I order consumables without a service visit?
Yes. Consumables are standalone parts orders — no PM visit or service job required. Send us the machine model and what you need.
Do you supply consumables for Japanese- or US-built DMG MORI machines?
No. We supply consumables for European-built DMG MORI, DECKEL MAHO and Gildemeister machines only — not Japanese- or US-built machines or other brands.
Need coolant, grease, oil or filters?
Send us the machine model and what you need — consumables ship as a standalone parts order. We'll quote it.